-
০০। A "D" size architectural sheet measures 24" X 36".
-
০১। A 15 degree line can be easily created by arranging both the 45 degree and 30/60 degree triangles.
-
০২। A back or backing weld is a type of:
- ক) Groove weld
- খ) Resistance weld
- গ) Arc and gas weld
- ঘ) Upset weld
-
০৩। A boss is a short raised protrusion above the surface of a part.
-
০৪। A circular arc is dimensioned in the view where you see its true shape by giving the value for its:
- ক) Diameter
- খ) Arc length
- গ) Radius
- ঘ) Chord length
-
০৫। A civil engineer working on a bridge design would probably rely on his ________ scale for checking printed drawings.
- ক) engineer‘s
- খ) metric
- গ) architect‘s
- ঘ) none of the above
-
০৬। A Class 3 fit is exceptionally high quality and recommended only when high cost of precision is warranted.
-
০৭। A contour interval is the horizontal distance between horizontal planes passing through successive contours.
-
০৮। A counterbore is a cylindrical recess around a hole, usually to receive a bolt head or nut.
-
০৯। A cylinder can be created by drawing a rectangular shape then the ________ tool.
- ক) Revolve
- খ) Sweep
- গ) Extrude
- ঘ) none of the above
-
১০। A designer is likely to brainstorm several ideas before deciding on a final plan.
-
১১। A detail drawing of a part is intended to provide the necessary information needed to fabricate that part.
-
১২। A double-curved surface is generated by a curved line and has straight-line elements.
-
১৩। A drafter can use the 45 degree triangle to draw a 30 degree line.
-
১৪। A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
- ক) architectural
- খ) civil
- গ) mechanical
- ঘ) process piping
-
১৫। A fillet is a rounded exterior blend between surfaces.
-
১৬। A fillet is a rounded surface on the ________ corner of a part.
- ক) Inside
- খ) outside
- গ) radial
- ঘ) isoplane
-
১৭। A fillet weld is a type of resistance weld.
-
১৮। A freehand sketch should show attention to proportion, clarity, and correct line widths.
-
১৯। A full scale technical drawing will have a scale factor of ________.
- ক) 1:1
- খ) 1:2
- গ) 2:1
- ঘ) 1:4